OSPF Series 6: OSPF Areas, OSPF Redistribution, Type-3 LSA, Type-5 LSA, Prefix Lists, Administrative Distance and Metric in OSPF

OSPF AREAS:

• It is specific to interface (given in the network command)

---

To make a router in OSPF as Autonomous System Border Router (ASBR) that connects it to another AS running static routing, then, use

• #router ospf 1
• #redistribute static //if the other external AS is using static routing

(OR)

#redistribute connected

OSPF Series 5: Link State Updates, Advertisements and Message Formats

LS Updates (and Advertisements):

• Note there is no LS Advertisement packet as such. Link State Update is the type of OSPF packet that carries many LS advertisements

• Each Link State Update packet carries a collection of link state advertisements one hop further from its origin. Several link-state advertisement may be included in a single LS Update packet. If any router notices a change in its networks, it sends that particular type of LS Update to the DR and BDR.

• Link State Update (carries Advertisements), it’s format is as given below:

OSPF Series 4: Configuring OSPF, Wildcard in OSPF, Loopback Interfaces and Router-ID and Transit and Stub Networks

Configuring OSPF:

• Configure IP address on an interface as 1.1.1.1/24
• Then enable OSPF using

OSPF Series 3: DR-BDR Election Process with Flowchart

DR and BDR Selection Process and Flowchart

• The DR and BDR happen for each segment of the network (not for each area). SO, it means one interface of a router can be a DR but another interface of the same router can be a DRO
• The flowchart of selecting the DR and BDR is given below:

OSPF Series 2: OSPF Neighbor States, OSPF Interface States and OSPF Neighborship Formation Requirements

OSPF NEIGHBOR STATES:

• • The below are the neighbour OSPF states:

\1. Down: no OSPF neighbors detected at this moment.

\2. Init: Hello packet received.

\3. Two-way: own router ID found in received hello packet. Then, DR and BDR determined

\4. Exstart: master and slave roles determined.